|
Brake Linings and Brake Discs, Check for Wear
 Remove
| 1. |
Remove brake linings
| • |
Brake linings of front wheel brake 
|
| • |
Brake linings of rear wheel brake
|
|
| 2. |
Measure brake lining remaining thickness using MKM-230-A (1)
|
Permissible minimum thickness of brake linings with
lining plate:
|
|
Front brake linings:
|
7 mm
|
|
Rear brake linings:
|
7 mm
|
|
|
|
| 3. |
Measure thickness of brake disc with MKM-230-A (1) at several points
Note: Permissible
tolerance of remaining brake disc thickness at various measurement
points 0.01 mm
|
Permissible minimum thickness of brake:
|
|
Front brake disc (solid disc) Z 10 XE, Z 12 XE
|
8.0 mm
|
|
Front brake disc (ventilated) Z 10 XE, Z 12 XE
|
17.0 mm
|
|
Front brake disc (ventilated) Z 14 XE, Y 17 DT, Y 17 DTL, Z 18
XE
|
21.0 mm
|
|
Rear brake disc (solid disc) Z 18 XE
|
8.0 mm
|
Note: Nominal Values,
front wheel brake
Note: Nominal values,
rear wheel brake
|
|
|
| 4. |
Check surface condition of brake disc
Note: Where there are
areas of overheating or scouring, the brake discs must be
replaced.
|
Install
| 5. |
Install brake linings
| • |
Brake linings of front wheel brake
|
| • |
Brake linings of rear wheel brake
|
|
|
