|
Brake Drum, Remove and Install (Models F 06, F
25)
 Remove
| 1. |
Detach rear wheel
| • |
Mark position in respect of brake drum
|
|
| 2. |
If necessary, turn back parking brake cable at adjusting nut
(1) on parking brake lever
Note: If the drum hub
has been worn down, turn back with a suitable tool through the bore
(2) to bring the cam over the parking brake lever of the brake
shoe
|
| 3. |
Unscrew detent screw (3) and remove brake drum.
|
|
|
Install
| 5. |
Place brake drum onto wheel hub and fit using detent screw -
tightening torque 4 Nm
|
| 6. |
Fit rear wheel - tightening torque 110
Nm
|
|
