Solenoid Valve, Exhaust Gas Recirculation Valve,
Remove and Install
Z 17 DTH
Remove
2. |
Disconnect wiring harness plug of engine control unit (2)
• |
Unclip wiring harness (1)
|
|
|
|
3. |
Remove air intake hose (1)
|
|
|
4. |
Release air intake pipe (1)
• |
Detach engine vent hose
|
|
|
|
|
5. |
Detach solenoid valve (1) from EGR valve (2)
|
|
6. |
Clean sealing surfaces.
|
Install
|
7. |
Attach solenoid valve (1) for exhaust gas recirculation (2)
• |
Tighten 3 bolts (3) 4.9 Nm
|
|
|
8. |
Attach 2 wiring harness brackets
|
9. |
Fasten air intake pipe (1)
• |
Attach engine vent hose
|
|
|
|
10. |
Attach air intake hose (1)
|
|
|
11. |
Connect wiring harness plug of engine control unit (2)
• |
Clip in wiring harness (1)
|
|
|
|
13. |
Program volatile memory
|
|