Oil Feed Line to Turbocharger, Replace
Remove
Important: On vehicles as of
model year 04 with ESP - every time the battery is disconnected,
the steering angle sensor loses its basic setting. It must be
recalibrated.
|
2. |
Disconnect battery
|
3. |
Remove oil feed line (1)
• |
Place collecting basin underneath.
|
• |
Unscrew 2 banjo bolts (arrows)
|
|
|
|
Install
5. |
Install oil feed line
• |
Tighten 2 banjo bolts 12 Nm
|
|
6. |
Check engine oil level, if necessary correct.
• |
Observe specified engine oil quantity
|
|
8. |
Program volatile memory
|
|