J335500 remove and install fly wheel (Z 14 XE
without air conditioning LHD, Z 16 YNG)
1. Remove manual transmission
- Note: Remove and install manual transmission – see
operation "Manual Transmission, Remove and Install" in group
"K"
2. Remove clutch
- Lock with KM-652 (1)
- Remove 6 bolts (arrows)
|
|
3. Detach flywheel
- Remove 6 bolts
- Remove using KM-652 (1)
4. Rework threads
5. Clean flywheel
6. Attach flywheel
- Renew bolts
- Tighten bolts (35 Nm / 26 lbf. ft. + 30° + 15°)
|
|
7. Install clutch
- Renew bolts
- Centre with KM-734 (2)
- Tighten bolts (15 Nm / 11 lbf. ft.)
- Remove KM-652 (1)
8. Install manual transmission
- Note: Remove and install manual transmission – see
operation "Manual Transmission, Remove and Install" in group
"K"
|
|
|