Vauxhall Workshop Service and Repair Manuals > Corsa C > J Engine and Engine Aggregates | DOHC Petrol Engine | Ribbed V-Belt | Repair Instructions | J607300 Ribbed V-Belt Tensioner, Remove and Install (Z 18 XE, with Air Conditioning, LHD)

J607300 Ribbed V-Belt Tensioner, Remove and Install (Z 18 XE, with Air Conditioning, LHD)

Remove

1.	Open bonnet

2.	Raise vehicle

Remove right-hand air duct

•	Remove 3 bolts (arrows)

Remove ribbed V-belt cover

•	Unscrew 3 bolts (1)

•	Remove clip (2)

Remove ribbed V-belt

•	Tension ribbed V-belt tensioner in direction of arrow with KM-913-A (2)

•	Use KM-6130 (1)

Remove ribbed V-belt tensioner

•	Tension ribbed V-belt tensioner.

•	Remove KM-6130 (2)

•	Release ribbed V-belt tensioner

•	Remove bolt (1)

Install

Install ribbed V-belt tensioner

•	Tighten bolt 35 Nm

•	Tension ribbed V-belt tensioner with KM-913-A

•	Use KM-6130

Install ribbed V-belt
Note: Observe running direction and installation position

•	Slacken ribbed V-belt tensioner with KM-913-A

•	Remove KM-6130

Install ribbed V-belt cover

•	Screw in 3 bolts

•	Install clip

10.

Install right-hand air duct

•	Tighten 3 bolts

11.	Lower vehicle

12.	Close bonnet

Vauxhall Workshop Service and Repair Manuals