Sheathed Glow Plugs, Replace (Z 17 DTH, with Air
Conditioning, LHD)
Remove
Important: On vehicles with ESP -
the steering angle sensor loses its basic adjustment each time the
battery is disconnected. It must be recalibrated
|
2. |
Disconnect battery
|
3. |
Remove air intake hose
|
4. |
Remove engine control unit (1)
• |
Disconnect 2 wiring harness plugs
|
|
|
|
5. |
Detach engine control unit bracket
Unscrew 4 bolts
|
6. |
Loosen air intake pipe (1)
|
|
|
7. |
Disconnect 4 sheathed glow plug wiring harness plugs (1)
|
8. |
Remove 4x sheathed glow plug (2)
|
|
|
Install
9. |
Tighten 4 sheathed glow plugs 17.5
Nm
|
10. |
Connect 4x sheathed glow plug wiring harness plugs
|
11. |
Fasten air intake pipe
|
12. |
Attach engine control unit bracket
• |
Connect 3 wiring harness plugs
|
|
13. |
Install air intake hose.
|
16. |
Program volatile memory
|
|