Field Remedy: 1632
| Subject: |
Common Rail Engines - Bad idle, lack of
power after ECU or injector replacement |
| Models: |
Engines: |
Option: |
| Agila 2004...,Corsa-C 2004...,Meriva
2004...,Vectra-C 2004... |
Z13DT,Z13DT| Z17DTH,Z17DTH,Z19DT|
Z19DTH |
None |
| Complaint: |
Bad idle, lack of power after ECU or
injector replacement |
| Cause: |
Injector flow adjustment not carried out.
Each injector has it's own classification which has to be
programmed after ECU or injector replacement. |
| Production: |
Not affected |
Remedy:
In case of ECU or Injector replacement the Injector Flow Adjustment needs to
be done according Service Instruction at the following engines/carlines:
Z13DT (Bosch Application) ->
Agila and Corsa-C
Z17DTH (Denso Application) ->
Corsa-C and Meriva.
Z19DT/DTH (Bosch Application) ->
Vectra-C (as of MY04.5).
The program the injectors proceed as follows:
1. Select vehicle diagnosis -->
>
Enter
2. Select modelyear -->
>
Enter
3. Select model -->
>
Enter
4. Select engine -->
>
Enter
5. Select Programming -->
>
Enter
6. Select Injector Replacement -->
>
Enter
7. Select Cylinder -->
>
Enter
- Change
- Enter classification code
- Confirm
The programming procedure will be available as of TIS-CD 48.
| FunctionalGroup: |
J - Engine |
| Complaint Group: |
18 - Poor Drivebility |
| Trouble Code: |
None |
|
