vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Control Unit > < Replace hot film mass air flow meter (Z 10 XE, Z 10 XEP, without air conditioning, LHD)

Corsa C

Replace hot film mass air flow sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)

  Remove

1.   1. Open bonnet
2.   Remove hot film mass air flow meter
•   Disconnect wiring harness plug (1)
•   Detach 2 intake hoses (2)
– Release 2x clamp
Object Number: 2410618 Size: DEFAULT


  Install

3.   Install hot-film mass air flowmeter
Note:   Note installation position. Arrow on hot film mass air flow sensor indicates direction of flow
•   Secure 2x clamp
•   Connect wiring harness plug
4.   4. Close bonnet

Control Unit > < Replace hot film mass air flow meter (Z 10 XE, Z 10 XEP, without air conditioning, LHD)