Vauxhall Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Knocking Sensor >
< Replace camshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Corsa C
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Inductive Impulse Sensor / Repair Instructions
Replace crankshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Replace crankshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Remove
1.
Open bonnet
2.
Raise vehicle
3.
Remove crankshaft sensor (2)
•
Disconnect wiring harness plug (1)
•
Remove bolt
Install
4.
Install crankshaft sensor
•
Replace seal ring
•
Tighten bolt
8 Nm
•
Connect wiring harness plug
5.
Lower vehicle
6.
Close bonnet
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Inductive Impulse Sensor / Repair Instructions
Replace crankshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Knocking Sensor >
< Replace camshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)