vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace catalytic converter control oxygen sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning system, LHD) > < Check fuel pressure (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)

Corsa C

Replace mixture regulation oxygen sensor, heated (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning system, LHD)

  Remove

1.   Open bonnet
2.   Remove intake pipe
•   Remove bolt
•   Pull suction pipe from bracket
3.   Remove heated oxygen sensor for mixture regulation
•   Disconnect wiring harness connector.
– Unclip cable
•   Carefully unscrew using KM-6129 (1)
Object Number: 2410644 Size: DEFAULT


  Install

4.   Install oxygen sensor, mixture regulation, heated
•   Apply assembly paste to threads
•   Tighten oxygen sensor 40 Nm
•   Connect wiring harness plug
– Clip in cable
5.   Attach intake pipe
•   Tighten bolt
6.   Close bonnet

Replace catalytic converter control oxygen sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning system, LHD) > < Check fuel pressure (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)