Corsa C
Systems | |||
---|---|---|---|
ENZ16SE | Engine Z16SE, Multec S (F) |
Components | |||
---|---|---|---|
A40 | Ignition coil - Direct ignition | F33 | Fuse |
A84A | Control unit - Multec | K26 | Relay - Engine control unit |
A111 | Throttle valve - Positioner | K35 | Relay - Fuel pump |
B28 | Sensor - Camshaft | L2A | Injection valve - Cylinder 1 |
B30 | Impulse sensor - Crankshaft | L2B | Injection valve - Cylinder 2 |
B39 | Sensor - Temperature, coolant | L2C | Injection valve - Cylinder 3 |
B57 | Sensor - Oxygen, catalytic converter check | L2D | Injection valve - Cylinder 4 |
B64 | Sensor - Temperature, intake air | Y56 | Solenoid valve - Exhaust gas recirculation |
B65 | Sensor - Knock control | Y57 | Solenoid valve - Tank ventilation |
B166 | Sensor - Oxygen, mixture control, heated |
Connectors | |||
---|---|---|---|
X18 | Body front & Engine | X56 | Engine & Control unit - Multec X56 |
X55 | Body front & Control unit - Multec X55 |
Grounding Points | |||
---|---|---|---|
12 | Engine |
Abbreviations | |||
---|---|---|---|
15 | Ignition voltage | F30 | Fuse F30 |
15A | 15 Ampere | F46 | Fuse F46 |
20A | 20 Ampere | KSP | Fuel Pump |
30 | Constant voltage | PPS | Pedal position sensor |
F9 | Fuse F9 | RC1 | Running change: Deleting exhaust gas recirculation |
Color codes | |||
---|---|---|---|
BK | Black | BURD | Blue-Red |
BKBN | Black-Brown | GN | Green |
BKRD | Black-Red | GYBK | Gray-Black |
BKWH | Black-White | GYRD | Gray-Red |
BKYE | Black-Yellow | RD | Red |
BN | Brown | RDBK | Red-Black |
BNBK | Brown-Black | RDBU | Red-Blue |
BNBU | Brown-Blue | RDWH | Red-White |
BNGN | Brown-Green | WHGN | White-Green |
BNRD | Brown-Red | WHYE | White-Yellow |
BNWH | Brown-White | YEVT | Yellow-Violet |
BU | Blue |