vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Pressure accumulator > < Camshaft Sensor, Replace

Corsa C

Intake Pipe, Pressure Sensor (MAP Sensor), Replace

  Remove

1.   Open bonnet
2.   Remove intake pipe pressure sensor (2) (MAP sensor)
•   Disconnect wiring harness plug of intake pipe pressure sensor (1) (MAP Sensor)
– Release wiring harness plug in direction of arrow
•   Remove bolt (3)
Object Number: 2406280 Size: DEFAULT


3.   Cleaning work
4.   Install intake pipe pressure sensor (MAP sensor)
Note:   Replace seal ring.
•   Bolt in bolt
•   Connect wiring harness plug of intake pipe pressure sensor (MAP Sensor)
– Lock wiring harness plug
5.   Close bonnet

Pressure accumulator > < Camshaft Sensor, Replace