Field Remedy: 1783

Subject: Engine Z13DT (Corsa-C only) - No A/C-ECC after ECU programming

Models:	Engines:	Option:
Corsa-C 2004...2005	Z13DT	only Corsa-C with A/C or ECC

Complaint:	The A/C compressor will not be activated after SPS programming of a P&A ECU.
Cause:	No CAN signal from ECU to BCM to activate A/C compressor. ECU is configured as Agila ECU (without CAN) if current is interrupted (ignition off, voltage drop) during SPS programming.
Production:

Remedy:

Quick Information 1783 is invalid please use Quick Information 1843 instead.