vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Fluid Cooler Lines > < Arrangement of Components, Wiring Harness (AF13-II)

Remove and install fluid filler tube (AF13-II)

  Remove

1.   Remove fluid dipstick.
2.   Remove bolt (1)
•   Pull fluid filler tube (2) out of transmission
•   Remove gasket (3)
Object Number: 2410043  Size: DEFAULT


  Install

3.   Insert new seal ring into fluid filler pipe with assembly grease
4.   Push fluid filler tube in as far as it will go
•   Tighten with bolt on transmission 60 Nm
5.   Insert fluid dipstick.

Fluid Cooler Lines > < Arrangement of Components, Wiring Harness (AF13-II)