|
Fluid Pressure, Check (AF13-II) (Mechanical)
 Remove
Important: Eliminate possibility
of operating fault. For full load check, engage parking brake and
depress service brake Do not check for longer than 5 seconds, due
to risk of overheating at full load. Allow pauses for cooling.
Only the main pressure is checked.
|
| 1. |
Remove plugs (1)
|
| 2. |
Attach fluid pressure gauge KM-498-B
(3) with adapter KM-580 (2)
|
|
|
Install
| 3. |
Check transmission fluid level 
|
| 4. |
Check main pressure. Test values – see "4-speed Automatic
Transmission (AF13-II)" checking instructions.
|
| 5. |
Attach plug (1) to transmission with new gasket 8 Nm
|
| 6. |
Check transmission fluid level
|
|
|
|
