|
Rear Ring Gear with Freewheel F0, Remove and
Install (AF13-II)
 Remove
| 2. |
Remove multi-plate clutch assembly C1 
|
| 3. |
Remove multi-plate clutch assembly C0 and C3
|
| 4. |
Remove thrust washer (1) and axial needle bearing assembly
(2)
|
| 5. |
Remove rear ring gear with freewheel F0 (3) upward (arrow) out
of transmission housing
|
| 6. |
Remove friction washer (5) and axial needle bearing assembly
(4)
|
|
|
Install
| 7. |
Install friction washer (2) and axial needle bearing (1)
| • |
Stick to rear ring gear with freewheel F0 with assembly
grease
|
|
| 8. |
Install rear ring gear with freewheel F0 (5)
| • |
Thread onto planet carrier assembly with planetary gears
|
|
| 9. |
Install thrust washer (3) and axial needle bearing assembly
(4)
|
| 10. |
Install multi-plate clutch assembly C0 and C3
|
| 11. |
Install multi-plate clutch assembly C1
|
|
|
|
