|
Replace selector lever
 Remove
| 2. |
Unclip wiring trough (1) and lay aside
|
| 3. |
Prise off selector lever actuation cable (5) from selector
lever shift rod with screwdriver
|
| 4. |
Unclip selector lever actuation cable from bracket
| • |
Detach retaining clamp (4) from selector lever actuation cable
bracket
|
| • |
Disconnect selector lever assembly wiring harness plug (2)
|
|
| 5. |
Remove selector lever assembly
| • |
Detach 4 bolts (3) and (6) for selector lever assembly from
vehicle underbody
|
|
|
|
Install
| 6. |
Attach selector lever assembly to vehicle underbody
| • |
Tighten 4x bolt (3) and (6) 5 Nm
|
|
| 7. |
Clip selector lever actuation cable into bracket
| • |
Attach new retaining clamp (4) to selector lever actuation
cable
|
|
| 8. |
Attach selector lever actuation cable (5) to selector lever
shift rod
|
| 9. |
Clip in wiring trough (1)
|
| 10. |
Connect selector lever assembly wiring harness plug (2)
|
| 11. |
Install centre console
|
|
|
| 12. |
Check selector lever safety functions 
|
|
