|
Replace selector lever lock solenoid switch
 Remove
| 1. |
Remove selector lever assembly 
|
| 2. |
Pull off selector lever lock solenoid switch (2)
| • |
Detach 2 bolts (1) from selector lever console
|
|
| 3. |
Disconnect wiring harness plugs (3) and (4) from selector lever
lock solenoid switch
|
|
|
Install
| 4. |
Connect wiring harness plugs (2) and (3) to selector lever lock
solenoid switch (1)
|
| 5. |
Attach selector lever lock solenoid switch to selector lever
console with 2 bolts (4)
Note: Ensure that
actuator is sitting in release lever.
|
| 6. |
Install selector lever assembly
|
|
|
| 7. |
Check selector lever safety functions
|
|
