Replace drive shaft bearing in clutch housing
(F23)
Remove
1. |
Dismantle transmission
|
|
2. |
Remove drive shaft bearing (4) and spacer (3) from clutch
housing
• |
Drive bearing and spacer out with KM-248-2 (1) and KM-248-4
(2)
|
|
|
Install
3. |
Clean bearing seating in clutch housing
|
|
4. |
Install new drive shaft bearing (3) in clutch housing
• |
Drive in with KM-6120 (2) and KM-523-1 (1)
|
• |
The rounded side (arrows) faces inwards towards the spacer
|
|
5. |
Install spacer (4) in clutch housing
• |
Drive in with KM-6112 (2) and KM-523-1 (1)
|
|
|
|