Replace intermediate shaft cover (F23)
Remove
|
2. |
Attach transmission (2) to workbench with KM-113-2 (4) and KM-6115
(1)
• |
Attach transmission to KM-6115 with
4x bolt (arrows)
|
• |
Attach transmission with KM-6115 to
KM-113-2
|
|
|
|
3. |
Remove intermediate shaft cover (2)
• |
Knock out with KM-328-B (5) and KM-6101 (4)
– |
Using a suitable drift (1) drive in hole centrally (3)
|
– |
Screw KM-6101 flush into the
cover
|
|
|
4. |
Remove transmission fluid pipe
|
|
6. |
Inspect transmission fluid pipe for damage
|
Install
|
7. |
Insert transmission fluid pipe (4) in intermediate shaft
|
8. |
Drive intermediate shaft cover (3) in flush into clutch
housing
• |
using KM-6102 (2) and KM-523-1 (1)
|
|
|
|
9. |
Detach transmission (4) from KM-6115
(1) and (3)
• |
Remove clutch housing with KM-6115
from KM-113-2 (2)
|
|
|
|