Shift Actuation Assembly, Remove and Install
(F23)
Remove
Important: Open clamping piece as
far as notch (4) only; opening any further (overstretching) may
destroy clamping piece.
|
2. |
Detach shift cables from shift lever assembly
• |
Detach selector cable from clamping piece (3)
Note: Transmission in
neutral. Open clamping piece using a small screwdriver.
|
• |
Detach shift cable from clamping piece (2)
|
• |
Unclip shift cables from counterhold
Note: Compress to
release lugs (1)
|
|
3. |
Remove shift actuation assembly
• |
Unscrew 4x bolt (arrows)
|
|
|
|
Install
4. |
Install shift actuation assembly
|
5. |
Attach shift cables to shift lever assembly
• |
Insert selector cable (white) in clamping piece (3)
Note: Do not lock
clamping piece yet
|
• |
Insert shift cable (black) in clamping piece (2)
Note: Do not lock
clamping piece yet
|
• |
Clip shift cables into counterhold
Note: Make sure that
the lugs (1) engage.
|
|
|
|
6. |
Transmission Shift Linkage, Adjust
|
7. |
Check ease of gear shifting
|
8. |
Install centre console
|
|