|
Fuel Vapour Separator, Remove and Install
Note: Fuel escapes
– observe safety measures and national legislation.
 Remove
| 1. |
Remove fuel filler pipe
Note: Vent hose remains
attached to fuel filler pipe, do not disconnect degassing hose from
rear degassing line.
|
| 2. |
Detach degassing hoses (1) and (3) from fuel vapour separator
(2)
Note: Observe
arrangement and laying of the degassing hoses.
|
| 3. |
Remove fastening bolt (arrow) and fuel vapour separator from
fuel filler pipe.
|
| 4. |
Press fuel vapour separator off fuel filler pipe upwards.
Note: Only for
Combo
|
|
|
Install
| 5. |
Attach fuel vapour separator to fuel filler pipe with fastening
bolt
|
| 6. |
Push degassing hoses on to port on fuel vapour separator
Note: Observe
arrangement and laying of the degassing hoses.
|
| 7. |
Clip fuel vapour separator on to fuel filler pipe
Note: Only for
Combo.
|
| 8. |
Install fuel filler pipe
|
|
