Replace battery of radio remote control
Note: The battery
should be changed within 3 minutes, otherwise the radio remote
control will have to be re-synchronised.
Remove
1. |
Open radio remote control
• |
Prise up locking mechanism
Note: Prise up locking
mechanism between key fob and key bit using small screwdriver.
|
• |
Pull key bit (1) off key head (2)
|
• |
Lift top half of key head away from bottom half
|
|
Important: Do not prise the
halves apart using a screwdriver or similar tool, since this may
damage the seal.
|
2. |
Remove battery (3)
Note: Dispose of used
batteries in accordance with environmental regulations.
|
|
|
Install
3. |
Insert battery (battery type: 3V Lithium CR 2032)
Note: Observe
polarity.
|
4. |
Assemble radio remote control
• |
Connect the two halves of the key head
|
• |
Slide key bit into key head until it engages
Note: The battery
should be changed within 3 minutes, otherwise the radio remote
control will have to be re-synchronised.
|
|
|