|
Clutch Switch, EGR, Remove and Install
 Remove
| 1. |
Remove lower instrument panel padding, driver's/passenger's
side
|
| 2. |
Remove clutch switch
| • |
Release wiring harness plug and disconnect
|
| • |
Draw actuating pin and locking sleeve out of the clutch switch
as far as stop
|
| • |
Unlock clutch switch and remove from pedal support
|
|
|
|
Install
| 3. |
Install clutch switch
| • |
Connect and lock wiring harness plug
|
| • |
Insert clutch switch in pedal support and lock
|
|
| 4. |
Install lower instrument panel padding, driver's/passenger's
side
|
|
