Water Tank / Pump, Screen Wash/Wipe System, Remove
and Install
Remove
1. |
Remove tank
• |
Draw tank out of holder
|
• |
Unclip wiring harness bracket (1) from tank
|
• |
Disconnect wiring harness plug (2)
|
|
2. |
Remove pump
• |
Pull pump (3) slightly to the side and draw out of
container
– |
Collect any escaping cleaning fluid.
|
|
|
|
|
Install
4. |
Install tank
• |
Connect wiring harness plug
|
• |
Clip wiring harness bracket into tank
|
|
|