Replacing curtain airbag wiring harness
Warning: If wiring
harness is damaged: repair, dismantling, replacement and
cross-replacement of cables that are attached to pyrotechnic unit
gas generators is not permitted.
Important:
Replacing the wiring harness for the curtain airbag is permitted.
The curtain airbag wiring harness connects the body wiring harness
to the gas generator of the curtain airbag.
Remove
1. |
Disconnect battery
Note: Wait for 1 minute
until capacitor has discharged
|
2. |
Remove inner panelling, C-pillar (F 08)
|
3. |
Remove inner panelling, C-pillar (F 68)
|
|
4. |
The wiring harness plug (2) and wiring harness plug (1) on the
gas generator are disconnected to remove the damaged curtain airbag
wiring harness.
|
|
|
5. |
Remove wiring harness plug from curtain airbag wiring
harness.
• |
Remove retaining clip (1) from wiring harness plug
|
• |
Compress wiring harness retaining clip (1)
|
• |
Pull off wiring harness plug (2)
|
|
|
|
6. |
Remove wiring harness plug from gas generator
• |
Remove wiring harness plug retaining clip (1) (arrow)
|
• |
Disconnect wiring harness plug (2)
|
• |
Unclip curtain airbag wiring harness retaining strap (3)
Note: Damaged curtain
airbag wiring harness retaining straps are replaced.
Note: The Aftersales
Department supplies the curtain airbag wiring harness as an
assembly with retaining strap.. The retaining strap and the wiring
harness are also available as individual components.
|
|
|
Install
7. |
Attach wiring harness plug to gas generator
• |
Connect wiring harness plug
|
• |
Fit wiring harness plug retaining clip
|
• |
Clip on wiring harness retaining strap
|
|
8. |
Fit curtain airbag wiring harness plug
• |
Attach wiring harness plug
|
• |
Fit wiring harness plug retainer
|
|
9. |
Check retainers of both wiring harness plugs, and check
attachment and routing of curtain airbag wiring harness.
|
10. |
Install inner panelling, C-pillar (F 68)
|
11. |
Install inner panelling, C-pillar (F 08)
|
13. |
Program volatile memories
|
|