vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Front member bracket (impact absorber), remove and install > < Replace wing bracket strut wheel housing

Corsa D

Replace front member (impact absorber)

  Remove

1.   Remove front panelling
2.   Remove both headlamps
Object Number: 10678800 Size: DEFAULT

3.   Remove front member
•   Unclip temperature sensor (2) wiring harness
•   Unscrew 2x bolts (1)

  Install

4.   Install front member
Important:   Use new bolts!
•   Tighten 2x bolts
•   Clip in temperature sensor wiring harness
5.   Install both headlamps and adjust LUREF_1.gif
6.   Install front panelling

Front member bracket (impact absorber), remove and install > < Replace wing bracket strut wheel housing