|
Overview of fitting tolerances (model L 68)
When setting reference gaps on the individual body components of
the Corsa-D, a parallel joint gap is required. The dimensions given
here refer to the painted and completed components.
Fitting tolerances for bonnet and wing:
|
|
Position:
|
Dimensions in mm:
|
Tolerance in mm.
|
|
I
|
3.5
|
+/- 1
|
|
II
|
2,4
|
+/- 1.2
|
|
III
|
3.8
|
+/- 1
|
|
IV
|
4.5
|
+/- 1.5
|
|
Front door fit tolerances:
|
|
Position:
|
Dimension in mm:
|
Tolerance in mm:
|
|
I
|
4.5
|
+/- 1
|
|
II
|
4.6
|
+/- 1
|
|
III
|
3.8
|
+/- 1
|
|
IV
|
3.8
|
+/- 1
|
|
V
|
4.5
|
+/- 1
|
|
VI
|
3.8
|
+/- 1
|
|
Rear door fit tolerances:
|
|
Position:
|
Dimension in mm:
|
Tolerance:
|
|
I
|
3.8
|
+/- 1
|
|
II
|
4.6
|
+/- 1
|
|
III
|
3.8
|
+/- 1
|
|
IV
|
3.8
|
+/- 1
|
|
V
|
4.5
|
+/- 1
|
|
VI
|
3.8
|
+/- 1
|
|
Fitting tolerances for tailgate:
|
|
Position:
|
Dimensions in mm:
|
Tolerance in mm:
|
|
I
|
5.5
|
+/- 1.2
|
|
II
|
4
|
+/- 1
|
|
III
|
6
|
+/- 1.5
|
|
IV
|
4
|
+/- 1.25
|
|
|
