|
Replace rear panelling spoiler
 Remove
|
| 1. |
Detach rear panelling spoiler from rear panelling
| • |
Remove body-bound rivets (arrows)
|
|
| 2. |
Use a suitable tool to detach the left corner of the rear
panelling spoiler (2).
Note: Pay attention to
the immersion depth of the separating tool!
Note: Do not damage the
rear panelling!
|
| 3. |
Secure the cutting wire in the T-grips (1)
| • |
Use the cutting wire from glass removal kit BO-46974
|
| • |
Use the T-grips from MKM-589-B
|
|
| 4. |
Insert the cutting wire at the detached corner of the rear
panelling spoiler (2)
|
| 5. |
Slowly cut the adhesive seam from left to right
Note: Do not damage the
rear panelling!
|
| 6. |
Remove the rear panelling spoiler
|
| 7. |
Remove adhesive seam residue with a flat scraper
Note: Do not damage the
rear panelling!
|
|
Install
| 8. |
Follow the instructions accompanying the new part for
installation.
|
|
