vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
ECC Electronic Climate Control|Blower > < Control Component for ECC, Remove and Install

Corsa D

Bulbs for heater control, remove and install

  Remove

1.   Disconnect battery
Object Number: 10678149 Size: DEFAULT

2.   Remove radio
•   unlock with KM-6097
•   Disconnect wiring harness plug (2)
•   Pull off antenna cable (1)

Object Number: 10678591 Size: DEFAULT

3.   Remove SAC control component
•   Unscrew 2x bolts (2)
•   Unclip 4x heater control element (3)
•   Release and separate 4x wiring harness plug (1)
•   Pull heater control element forward

4.   Remove bulbs for heater control unit
•   Unclip bulb holder 2x
•   Remove bulbs 2x

  Install

5.   Install bulbs for heater control element
•   Insert 2x bulbs
•   Clip in bulb holder 2x
6.   Install SAC control
•   Connect and lock 4x wiring harness plug.
•   Clip in 4x
•   Insert heater control element
•   Tighten 2x bolts
7.   Install radio
8.   Connect battery
9.   Program volatile memories

ECC Electronic Climate Control|Blower > < Control Component for ECC, Remove and Install