Cylinder head machining special tools
|
KM-113-2
|
Mount for assembly device
|
KM-301
|
Measuring bridge
|
KM-340-G
|
Valve cutter set
|
To cut and correct valve seating
|
KM-340-100
|
Valve cutter set
|
To cut and correct valve seating
|
KM-352
|
Installer (8 mm)
|
To install the valve stem sealing
|
KM-419
|
Distance gauge
|
To check valve stem projection
|
|
|
KM-512
|
Distance gauge
|
To check valve stem projection
|
KM-515
|
Reamer set (8 mm)
|
To ream valve guide
|
MKM-571-B
|
Dial gauge
|
To check installation height of valves, to check swirl chamber
projection, to check valve tilt play
|
KM-654
|
Assembly tool
|
To remove/install valve guides (15 DT, X 17 DT) 1)
|
KM-663
|
Installers (7 mm)
|
To install the valve stem sealing
|
KM-664
|
Reamer set (7 mm)
|
To ream valve guide
|
|
|
KM-805
|
Reamer (6 mm)
|
To ream valve guide
|
KM-831
|
Reamer set (6 mm)
|
To ream valve guide (25 DT, X 25 DT) 1)
|
KM-835-A
|
Installer (6 mm)
|
To install valve stem seals
|
KM-840
|
Remover
|
To remove valve stem seal
|
KM-841
|
Plastic guard
|
To remove / install valve spring and valve (25 DT, X 25 DT) 1)
|
KM-842
|
Remover
|
To check cylinder head for leaks (25 DT, X 25 DT) 1)
|
|
|
KM-849
|
Storage facility
|
Storage facility for pistons, con-rods, valves etc.
|
KM-946
|
Protective cap
|
To remove / install valve springs and valve cotters (X 20 DTL, Y
20 DTH / DTL, Y 22 DTH) 1)
|
KM-958
|
Installer (5 mm)
|
To install valve stem seals (X 10 XE, X 12 XE) 1)
|
KM-961
|
Reamer (5 mm)
|
To ream valve guide (X 10 XE, X 12 XE) 1)
|
KM-965
|
Reamer (7 mm)
|
To ream valve guide
|
KM-6022
|
Reamer (6 mm)
|
To ream valve guide (X 14 XE, X 16 XE, X 16 XEL) 1)
|
|
|
MKM-6086
|
To install/remove valve cotters (6 mm)
|
To remove and install valve springs and valve cotters
|
MKM-6086-200 / 300 / 400
|
To install/remove valve cotters (5, 7, 8 mm)
|
To remove and install valve springs and valve cotters
|
KM-6091
|
Installer (6 mm)
|
To install the valve stem sealing
|
KM-6093
|
Installer
|
To install heat sleeve (Y 17 DT) 1)
|
KM-6094
|
Remover
|
To remove heat sleeve (Y 17 DT) 1)
|
KM-6095
|
Installer/remover
|
To install / remove valve guide (Y 17 DT) 1)
|
|
|
MKM-6152
|
Installer (6 mm)
|
To install valve stem seals (Z 22 SE)
|
KM-6167
|
Adapter Set
|
Assembly device for operations on cylinder head
|
KM-6171
|
Release tool
|
To release valve
|
KM-6215
|
Assembly device
|
Assembly device for operations on cylinder head
|
MKM-6216
|
Dial gauge with internal caliper (6 mm)
|
To check valve guide
|
MKM-6216-200 / 300 / 400
|
Dial gauge with internal caliper (5, 7, 8 mm)
|
To check valve guide
|
|
KM-6385
|
Installer
|
|
Valve shaft seal installation
|
|
|
KM-6386
|
Removal and installation tools
|
|
Valve guides, remove and install
|
|
|
KM-6387
|
Adapter
|
|
Clamping valve springs with KM-348 (cylinder head removed)
|
|
|
1 ) The engine designations indicated are examples.
|