Replace throttle valve module
Remove
2. |
Remove air cleaner housing
|
3. |
Remove throttle valve module (2)
• |
Disconnect wiring harness connector.
|
|
|
|
Install
6. |
Install throttle valve module
• |
Tighten 4x bolts
– |
Tightening torque 8 Nm .
|
|
• |
Fix wiring harness plug
Note: After removal,
installing or replacement, it is no longer necessary to train
throttle valve modules with S0 control. The intake manifold must be
replaced after removing and installing the throttle valve module
ten times.
|
|
7. |
Install air cleaner housing
|
|