Control Unit - Telephone System - Replace (Upgrade
Kit)
Remove
|
2. |
Remove lower foot well panelling, passenger side (3).
|
|
|
3. |
Remove glove compartment
• |
Unscrew 4 screws (1) and (2)
|
• |
Disconnect the wiring harness plug, glove compartment
lighting
|
|
|
|
4. |
Remove control unit
• |
Separate wiring harness plug for power supply (1)
|
• |
Disconnect wiring harness plug for speaker (2)
|
• |
Separate wiring harness plug for microphone (3)
|
• |
Separate base bracket compact plug (5)
|
• |
Disconnect antenna cable (6)
|
|
|
Install
5. |
Fit control unit
• |
Connect 4x wiring harness plug
|
|
6. |
Attach glove compartment
• |
Fix wiring harness plug
|
|
7. |
Attach lower right footwell panelling
• |
Clip panelling in position
|
|
9. |
Program volatile memories
|
|