Replace clutch switch for engine control RHD
Remove
|
1. |
Remove footwell panelling - driver's side
• |
Unclip footwell panelling (3) at position (2)
|
|
|
|
2. |
Remove clutch switch for engine control
• |
Disconnect wiring harness plug (1)
|
• |
Unclip switch (2)
– |
Unlock switch fuse (3) in (direction of arrow)
Note: Diagram shows
switch when removed
|
|
|
|
Install
3. |
Install clutch switch for engine control
• |
Fix wiring harness plug
|
|
4. |
Install footwell panelling - driver's side
• |
Clip in footwell panelling
|
|
|