vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace wiring harness - transmission MTA > < Replace aerial cable of rear aerial L08

Replace aerial cable of rear aerial L68

  Remove

1.   Lower headlining
2.   Remove rear sill inner panelling LUREF_1.gif
3.   Remove front sill inner panelling LUREF_1.gif
4.   Remove side panel inner panelling LUREF_1.gif
5.   Separate roof antenna
•   Disconnect wiring harness plug (1)
Object Number: 10680093  Size: DEFAULT




6.   Lay antenna cable from roof frame junction to B-pillar
Note:   The old aerial cable remains in the wiring harness.
Note:   The new aerial cable is routed parallel to the existing aerial cable and is secured with duct tape and cable ties.



7.   Lay antenna cable from B-pillar to junction (1) at A-pillar

  Install

8.   Connect antenna cable to roof frame and at junction A-pillar
9.   Install moulded headlining
10.   Install side panel interior panelling LUREF_1.gif
11.   Install front sill inner panelling LUREF_1.gif
12.   Install rear sill inner panelling LUREF_1.gif

Replace wiring harness - transmission MTA > < Replace aerial cable of rear aerial L08