Replace heating, venting and air conditioning
wiring harness (LHD)
Remove
2. |
Remove glove compartment
|
3. |
Remove lower panelling for instrument panel padding
|
4. |
Remove both lower centre instrument panel padding inner
panellings
|
5. |
Remove heating operation device
|
|
6. |
Remove heating, venting and air conditioning wiring harness
(1)
Note: The graphic shows
the wiring harness detached from the air distributor housing for
better clarity.
|
|
Install
7. |
Install heating, venting and air conditioning wiring
harness
|
8. |
Install heating operation device
|
9. |
Install both lower centre instrument panel padding inner
panellings
|
10. |
Install lower panelling for instrument panel padding
|
11. |
Fit glove compartment
|
13. |
Program volatile memories
|
|