Omega B
|
Corrosion Protection and Painting of Sheet Metal Part at a Glance
The following illustrations show the most important corrosion protection measures at a glance.
The painted areas are marked with code numbers (legend) for easier understanding.
1 Alloy galvanized on one side 2 Alloy galvanized on both sides 3 Flange cementing 4 Zinc phosphatizing 5 Thick film cataphoretic dip priming 6 Flange sealing 7 Fill priming * 8 Anti - abrasive underseal 9 Top coat 10 Base coat 11 Cavity protective wax 12 Storage and transit protective wax 13 Engine compartment components protective wax 14 nderbody protective wax
* Water - based products · High strength low alloy (HSLA)
· Service
Treatment and processing of alloy - galvanized sheet metal parts does not differ from that of conventional sheet metal panels. After bodyworking, appropriate further treatment (corrosion protection) must be carried out as previously.
Important: This high quality production priming is the basis for paint repair systems in Service -
Note: 6 year corrosion perforation warranty; 1 year paint warranty
|
