Electronically Controlled Seat/Mirror Adjustment with Memory Quick Check F0: DATA LIST
No.
TECH 1 Display
Conditions for Checking
Nominal Value
Trouble Codes
Terminal
33
FUNCTION MODE
Ignition ON
No button or switch actuated
NONE
-
Actuate any switch for manual seat adjustment
MANUAL ADJUST.
Actuate memory button and a position button
Note:
The current position of the driver's seat and mirror is stored in the control unit. Inform customer.
STORE POSITION
Depress one of three position buttons and hold
While the mirrors and driver's seat move to the stored position
At the end of the adjustment procedure
If TECH 1 displays RELAY FAILURE the operating voltage is too high or too low or one of the main relays in the control unit does not function.
SW. AUTO. ADJUST.
AUTO. ADJUSTMENT