F5:ACTUATOR TEST NO.08 SELECT ACTUATOR ENGINE SPEED
Table 5, F5: Actuator Test
No.
TECH 1 Display
Conditions for
Checking
Nominal Value
Trouble Codes
Terminal
08
SELECT ACTUATOR ENGINE
SPEED
Engine running at idle speed
-
25
Press key F5 in the system main menu, use the arrow
keys to select the desired test and confirm with YES. Follow the instructions
in the TECH 1 display.
Engine speed alternates between less than 600 rpm and
more than 2300 rpm every 2 s.
This test runs for a maximum of 30 s or until
"YES" / "NO" is pressed
Notes for Trouble - shooting:
Nominal Value:
Cause of Fault:
Carrying out this test can lead
to stalling of the engine.