Vauxhall Workshop Service and Repair Manuals

  Remove

Unscrew cap (1) from brake fluid reservoir. Siphon off as much brake fluid as possible using siphon bottle.

For vehicles with manual transmission: Detach feed line for clutch master cylinder. Vehicles with LHD: Unclip engine wiring harness from spring strut dome.

Detach brake fluid reservoir from brake master cylinder.

  Install

Insert new seals (1) in brake master cylinder – lightly coat seals with brake cylinder paste if necessary. Insert brake fluid reservoir in brake master cylinder.

For vehicles with manual transmission: Attach feed line for clutch master cylinder to brake fluid reservoir. Vehicles with LHD: Fasten engine wiring harness to spring strut with clip.

Bleed brake system – see operation "Brake System, Bleed".