vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
AC Condenser Ribbed V-belt, Remove and Install > < Ribbed V-belt Tensioner, Check

Omega B

Ribbed V-belt, Remove and Install

  Remove

Remove charge air pipe – see operation "Charge Air Pipe, Remove and Install".

Model with AC: remove AC compressor ribbed V-belt – see operation "Ribbed V-belt – AC Compressor, Remove and Install".

Mark direction of travel of ribbed V-belt.

Tighten V-belt clamps in direction of arrow using screwdriver. Remove ribbed V-belt from ribbed V-belt deflection pulley (1).

Pull ribbed V-belt through ribbed V-belt jockey pulley (3) and ribbed V-belt jockey pulley arm (2). Thread ribbed V-belt between visco-fan and carburettor venturi.

 Object Number: 2399704 Size: DEFAULT

  Install

Thread ribbed V-belt between ribbed V-belt tension roller and ribbed V-belt tension roller bracket.

  Inspect

Note ribbed V-belt routing.

  1. Version without AC.
  2. Version with AC.

  Install

Tighten ribbed V-belt clamp using screwdriver. Then place ribbed V-belt on ribbed V-belt deflection pulley. Ensure that ribbed V-belt is routed correctly. Note running direction of ribbed V-belt.

 Object Number: 2387485 Size: DEFAULT

Install charge air pipe – see operation "Charge Air Pipe, Remove and Install".

For version with AC: install AC condenser ribbed V-belt – see operation "AC Condenser Ribbed V-belt, Remove and Install". Note operating direction of the ribbed V-belt.
Related Literature Units
-
-
-
-

AC Condenser Ribbed V-belt, Remove and Install > < Ribbed V-belt Tensioner, Check