· Engine
speed from start of injection sensor higher than 455 rpm
and
· Engine
speed from engine speed sensor lower than 68 rpm (circuit interruption)
· Conditions
must be fulfilled for at least 0.42 s
Replacement values:
· Engine
speed from start of injection sensor
Effects:
· Maximum
output is reduced.
· The
idle speed is increased to approx. 2000 rpm.
· The
exhaust gas recirculation valve is switched off.
· If
there is a failure at an engine speed below approx. 1800 rpm, the engine
may stall
Note:
The driveability is compromised.
|