vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 37 INCORRECT BRAKE SWITCH SIGNAL > < F2: TROUBLE CODES - Trouble Code 31 NO ENGINE RPM SIGNAL

DIGITAL DIESEL ELECTRONICS DDE 2.1     F2: TROUBLE CODE TABLE

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

34

INJ. TIMING OUT OF RANGE

22

·   Current start of injection value is lower than nominal start of injection value - 2 °CA

     or

·   Current start of injection value is higher than nominal start of injection value + 2 °CA

·   Conditions must be fulfilled for at least 21 s

 

Effects:

·  The injection quantity is reduced to 21 mg / stroke, i. e. maximum output is reduced.

·   The exhaust gas recirculation valve is switched off.

 

Note:

The current start of injection value is determined by the start of injection sensor, nominal start of injection value is calculated by the control unit.

 

 


Related Literature Units
-F0: DATA LIST - Test Step 22 INJ. REGULATION

F2: TROUBLE CODES - Trouble Code 37 INCORRECT BRAKE SWITCH SIGNAL > < F2: TROUBLE CODES - Trouble Code 31 NO ENGINE RPM SIGNAL