· Engine
speed lower than 6520 rpm
· Mass
air flow meter signal is greater than 435 kg / h
(short circuit to voltage)
Note:
The fault can generally be
expected to be caused by defects in the wiring.
Replacement values:
· The
control unit calculates for the load signal using a replacement characteristic
curve depending on the engine speed and the throttle valve angle.
· If
the throttle valve potentiometer is also defective, the following replacement
values are used for calculation:
For engine speed lower than
1520 rpm with load signal = 2.5 ms
For engine speed higher than
1520 rpm with load signal = 4.8 ms
|