vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 44 INJECTION PULSE > < Crankshaft Pulse Pick-up, Remove and Install

F0:DATA LIST

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

10

VEHICLE SP. PULSE

Vehicle travelling at approx. 50 km/h (30 MPH)

alternating RECEIVED

and

NOT RECEIV 12V

-

9, 19

Notes on Trouble - shooting:

Nominal Value:

Cause of Fault:

·   Ignition OFF

·   Using multimeter, check from plug of ABS - 2SH control unit U 4.8 / X 25 P / Ter. 6 to control unit K 61 / Ter. 9 for passage

approx. 0 W 

·   Short circuit or lead interruption from ABS  - 2SH control unit U 4.8 / X 25 P / Ter. 6 to control unit K 61 / Ter. 9

·   Plug connection X 1 / Ter. 46 defective

·   Plug connection X 3 / Ter. 7 defective

·  Disconnect plug connection X 3

·   Using multimeter, check from

     ABS - 2SH control unit plug U 4.8 / X 25 P / Ter. 6 to plug X 3 / Ter. 7 for passage

W

·   Short circuit or lead interruption from instrument panel plug X 3 / Ter. 7 to ABS  - 2SH control unit U 4.8 / X 25 P / Ter. 6

·   Plug connection X 1 / Ter. 46 defective

·   ABS - 2SH control unit U 4.8 defective

·   ABS  - 2SH control unit U 4.8 Ter. 1 defective

·   Fuse F 2 defective

·   Instrument panel defective

·   Ignition lock defective

 

 

F0: DATA LIST - Test Step 44 INJECTION PULSE > < Crankshaft Pulse Pick-up, Remove and Install