Vauxhall Workshop Service and Repair Manuals

Conditions for Checking

Nominal Value

Vehicle stationary

Engine running at idle speed

Selector lever position "N"

Depress brake pedal

Press F8 in the system main menu, select desired test with arrow keys and confirm with YES. Follow instructions in the TECH 1 display.

Important:

The current display is updated in TECH 1, but not the display of the corresponding pressure.

Note:

After actuation of the "YES" key, the PRESS. REG. CTR. can be modified step by step

After 30 s or by pressing the "EXIT" key, the test is finished

In this mode it is possible to increase or decrease the pressure step by step.

The various data list parameters of the transmission control unit can be displayed by pressing "YES" and "NO"

By pressing "F9" it is possible to store the data as in the snapshot mode

100 to 1100 mA

Display of main pressure is not updated.