vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Trouble Code Table - Trouble Code 45 CONTINOUS BATTERY VOLTAGE LOW (KL.30) > < Trouble Code Table - Trouble Code 39 NO TRANSMISSION OUTPUT RPM SIGNAL

Omega B

Table 2, Trouble Code Table

 

If a 6-cylinder transmission is programmed for the 4-cylinder transmission variant, the transmission control unit goes into the emergency program (trouble code 41 is stored). Before further checks, ensure that the correct transmission variant is programmed. See section F7:PROGRAMMING

 

 

 

 

 

 

Remedy in

 
Trouble

Information Sensor

F0:DATA LIST

Trouble Code Storage when ...

Code

Cause of Fault

No.

 

41

GEAR ERROR HYDRAULIC FAULT

see section 5.4.7

·   The fault is recognised if the ratio between the engine speed and the transmission output speed is more than

     3 s outside a certain tolerance (excessive slippage)

 

 

Effects:

 

·  Solenoid valves (brake band, 1-2/3-4 shift, 2-3 shift, torque converter clutch) and electro-hydraulic pressure regulator are switched off

·  On fault recognition, the following individual gears can still be shifted manually (emergency program):

     "Driving stage" (gear) "D"(4), "3"(4), "2"(3), "1"(1)

 

 

Note:

 

See section 5.4.7 trouble-shooting according to trouble code 41

 
 

 

 

 

Trouble Code Table - Trouble Code 45 CONTINOUS BATTERY VOLTAGE LOW (KL.30) > < Trouble Code Table - Trouble Code 39 NO TRANSMISSION OUTPUT RPM SIGNAL