CDLS, F0:DATA LIST
No.
TECH 1 Display
Conditions for Checking
Nominal Value
Trouble Codes
Terminal
INFRARED SIGNAL
Ignition OFF
Hold ignition key towards infrared receiver
-
13
Buttons on infrared transmitter not pressed
INACTIVE
Centre button on infrared transmitter pressed
Note:
Ensure that the infrared transmitter being used is programmed
(see test steps 21 and 22).
If the system does not react, press the button several times.
ACTIVE
Nominal Value:
Cause of Fault:
(If nominal value is not attained)