Vauxhall Workshop Service and Repair Manuals

Test

Test Equipment

Check

Notes

Nominal

Step

Multimeter

Value

MKM-587-A

of

between

3

Ohmmeter, range

200 W

Standby for ECWW in ECWW switch S37 (centre console)

6-pin Ter. 5 (BR)

Ground

·   Disconnect 6-pin console wiring harness plug

·   Measurement between 6-pin wiring harness plug (body side) and body ground

approx.

0 W

6-pin Ter. 5 (BR)

9-pin Ter. 9 (GRWS)

·   Disconnect 9-pin console wiring harness plug

·   Open front left door

approx.

0 W

6-pin Ter. 5 (BR)

9-pin Ter. 8 (GR)

·   Measurement between 6-pin and 9-pin wiring harness plugs

     (body side of each)

approx.

0 W

Voltmeter, range

20 V, DC

Standby for ECWW in ECWW switch S37 (centre console)

6-pin/ Ter. 5 (BR)

9-pin/ Ter. 4 (RT)

·   Measurement between 6-pin and 9-pin wiring harness plugs (body side of each)

greater than

11.5 V

6-pin/ Ter. 5 (BR)

9-pin/ Ter. 6 (SW)

·   Ignition ON

·   Measurement in 6-pin and 9-pin wiring harness plugs

     (body side of each)

greater than

11.5 V

·   After measurement, ignition OFF

Possible Faults:

(If nominal value is not attained)

Measurement between 6-pin console wiring harness plug and body ground:

·   Interruption in body wiring harness between body ground and 6-pin wiring harness plug Ter. 5.

·   Ground connection corroded.

Measurement between 6-pin and 9-pin console wiring harness plugs or in 6-pin wiring harness plug:

·   Fuse F1 defective.

·   Interruption in instrument panel wiring harness between fuse F1 and instrument panel/body wiring harness plug X1/Ter. 12.

·   Fuse F7 defective.

·   Interruption in instrument panel wiring harness between fuse F15 and instrument panel/body wiring harness plug X1/Ter. 49

·   Instrument panel/body wiring harness plug X1 detached.

·   Interruption in body wiring harness between instrument panel/body wiring harness plug X1 and 6-pin console wiring harness plug Ter. 5.

·   Interruption in body wiring harness between instrument panel/body wiring harness plug and 9-pin console wiring harness plug Ter. 4.

·   Interruption in body wiring harness between 9-pin console wiring harness plug and door contact switch S47.

·   Driver's door contact switch S47  defective.

·   Ground connection corroded.

If nominal values are attained, window winder automatic controls S37.7 in switch S37 defective.